Anti-condensation fleece
Anti-condensation fleece for retrofitting: The drop stop for tin roofs
Condensation on trapezoidal sheets is unavoidable, but dripping water can be dissolved. Our self-adhesive anti-condensation fleece effectively retrofits uninsulated roofs (carports, halls, tool sheds).
In contrast to elaborate coating coatings, our fleece offers guaranteed material strength and absorbency. Simply peel off the foil, stick it on, and you’re done.
Showing the single result
Premium anti-condensation fleece for Biohort garden sheds 60 cm width
28,95 € inkl. MwSt. zzgl. VersandkostenPremium anti-condensation fleece for Biohort garden sheds in 60 cm width.
Anti-condensation is a special type of non-woven material used in the installation of roofing sheets to reduce the appearance of condensation.
Bonding to Styrodur boards is possible without any problems.
Technical data:
- Material: Special fleece with water-absorbent properties
- Back: fully self-adhesive with removable protective film
- Width: 60 cm
- Length per unit: 1 linear metre (optionally longer, linear metre)
- Area per unit: 0.6 m²
- Weight: approx. 150–200 g/m²
- Temperature resistance: -20 to +80 °C
- Color: Light grey / non-woven colours
- Processing: Easy to apply to clean, dry surfaces
Pros:
- Prevents dripping due to condensation on metal and plastic roofs
- Ideal for tool sheds, carports, sheet metal garages, garden sheds or warehouses
- Also suitable as a retrofit solution
- Flexible cut-to-size and individually applicable
- Installation possible without additional adhesives
Shipping:
The anti-condensation fleece is sent folded in packages.
The fleece has a width of 0.60 m and is suitable for all common sheet metal profiles and Biohort garden sheds.
Which fleece do I need? The decision-making aid
We offer you different suction strengths for different purposes. Use this table to choose the right product:
| Product Variant | Suction power (water absorption) | Perfect for... |
|---|---|---|
| Standard anti-condensation fleece (The Best Seller) |
💧 approx. 900 g/m² (~ 0.9 liters) |
Open carports, patio roofs and storage areas with normal ventilation. |
| Premium Fleece "Extra Thick" (200g) (Test winner performance) |
💧💧💧 approx. 2,000 g/m² (~ 2.0 litres!) |
Closed garages, workshops, classic car storage. Provides additional sound insulation in case of rain/hail. |
| Special fleece for Biohort (60cm width) |
💧 Optimized | Tailor-made cut for Biohort tool sheds and narrow sheet metal tracks. Can also be glued to Styrodur. |
Professionals know: fleece for the surface, varnish for the edge
A common mistake: The fleece must not protrude into the gutter, otherwise it will "pull up" water from the outside (capillary effect).
- For the area: Use our self-adhesive fleece (stops dripping).
- For the eaves (lower 10-20cm): Leave the sheet metal free and paint it with our anti-condensation varnish to prevent corrosion at the end of the sheet.
- For repairs: Does old fleece come off? Fix it permanently with the Bonifix spray adhesive.
Instructions: Retrofit anti-condensation fleece
- Cleaning: The underside of the sheet metal must be absolutely dry, free of dust and grease.
- Teamwork: Work at least in pairs. The fleece immediately sticks extremely strongly – corrections are hardly possible!
- Bonding: Peel off the protective film piece by piece and press the fleece firmly against the profile (e.g. with a squeegee or paint roller).
- Drying: After installation, ensure that there is a draught so that the fleece can release any residual moisture that may be present.